TRELC Protective Pair Bike Handlebar Grips Bicycle Cycling Mountain Bike MTB Ergonomic

I've been through several bar ends over the years, always looking for a better pair. These are the best yet. The ends are curved perfectly and aren't too big or too small. I'm an urban vehicular cyclist and I frequently need to accelerate quickly. These ends allow me to grab my handlebars at the end and really crank hard on the bike. You do need to make sure they are tightened very, very securely. I also like the broad flat part of the handles, which are soft and grippy. The build quality and fit is very good. My grips are wearing out and I need to replace them after about 10,000 miles with this set.

"Super Simple Installation. It's really easy to install and adjust, only need a small screwdriver. Just about two minutes, you can have them securely installed, and you can freely adjust the angles for your riding preference." Incorrect however mine came with an Allen wrench.I thought I was getting grips with collars on both ends as per some other review pictures but the current description picture is correct. Installation was easy though I did use a rubber mallet and water. I did have to move my shifter and brakes in about 5mm to get the end collar to go over the bar so it would lock when tightened. I did run the bolt in and out once before installed to make sure the threads were clean. Overall, I think these are a good value for the money. The grips are broad, the rubber seems to be good quality and the horns are comfortable and the right size for me. (I wear a men's large glove).

I bought these to replace the standard grips on my Diamondback Insight hybrid bike. The DB grips were actually pretty comfortable but for my riding position I wanted the bar ends. These slipped right on and once tightened they worked great. Being winter, my bike is currently indoors on a trainer, but so far I've had no issues with the grips or bar ends. Once the season warms up I'll be taking them out on the roads. Can't yet speak for the durability of the end caps as some reviewers have reported.I went with the black/white to match my bike and they look really good.

The first pair I bought were defective: the bar end wasn't tapped correctly, so the bolt would not screw in. I received my refund quickly. Since the one side seemed to work well, I ordered another pair, and they seemed to work well.I really like the wide grip for the palm, and it seemed to alleviate most of the discomfort I was feeling in my hands.After 7 months, one side became loose. When I tightened it, the bolt head broke off, rendering the grip useless.I'm going to try another brand of grips.

Not bad for the price but if you are looking for really good quality, consider an alternative. The grip is rubber and the side handle is metal which is very nice and sturdy, good quality. The insides/innards are another story, all plastic and very cheap. The inside plastic tabs broke on me during installation. The rubber grips were loose on my Specialized Sirrus handle bars so it was necessary to tighten the end so they did not move. The end pieces do come off very easily if not secured and tightened to the handlebars. An allen wrench was provided with these and the ends are adjustable to different angles which is nice..

Had to cut these shorter to accommodate the shifters, so that the tightening screw (on the end) would grab the bar. The inner plastic is hard and does not grab the bar, so the tightening screw is critical unless you want to glue them on. Once on firmly they are fine. They worked great on a 225 mile trip. The seller was willing to give me a full refund due to my dissatisfaction, which I declined. Excellent customer service.

Love my new handle grips. They are not super soft gel filled handle. For the price I was looking for more surface area for fatigue. I wear gloves anyways so o was not worried. Exactly what I was looking for and the for the right price. For people having trouble installing you might have to move your gears in so when you tighten the grips they are on your handle bars. It took me a minute to figure that out. I quickly moved my gears in about a half an inch and slid them on a little further and have no issues!

Like others, I was going to return these because the ends kept falling off. However, upon researching a new pair, I discovered that in order to install them properly, in some cases, as with mine, it was necessary to loosen the gear shifters on the handlebars and slide everything toward the center of handlebars so that these grips could be pushed down until the ends are flush with the outer edge of the handlebars. After doing so, voila, they fit perfectly and I was able to tighten the grips onto the handlebars. I guess that seemed simple enough, but if you've never installed these before, you wouldn't automatically know to do that. Now I know

Todo muy bien... Artículo como es descrito

Look smart, holds firm on the bars, easy to fit (dismantle and build up on the handle bars), cheap, comfortable on short to medium rids, whay more do you need?

説明書は無く、取り付けが初めてなので私は時間がかかりました。ハンドルのバーの長さが足りなかったので私は切らずにブレーキと変速機の位置を内側に少しずらしました。使用感は手が疲れにくくなった気がします。バーエンドが取れないか不安が少しあります。しばらく様子をみます。なので星マイナス1

It is no exaggeration to say that these grips have transformed my cycling enjoyment. So much more comfortable than the original ones. I will never go back to conventional grips again. My palms now rest against the comfortable pads rather than the original grips which seemed to put pressure on the joints just below my fingers. A quality, well made product.

毎日、通勤で往復３７キロ走ります。ノーマルグリップでは痛くなり　色々手の置き場を変えていましたがこの商品は痛くならない。片道１時間弱　苦痛から解放された。もっと早く交換しとくべきだった。